Pros: - The build quality is second to none. Everything has been through of and the quality of the components and constructions are fantastic. I have been using NZXT and I was happy for the most part. But this case gave me much more room to work in and much better features.

Cons: - None that I can tell.

Overall Review: I would recommend this for those who want room to build, tons of options for interior builds, and those who want a polish and finished look. This case is not gigantic but it is wide so be sure it will fir your needs.

Pros: -LOTS of space for fans, radiators, and water pumps. FIts large GPUs with no problem: increasingly-important especially with the introduction of the 30 Series from NVIDIA -Great airflow: can't get much better unless you opt for an open-air build -Attractive, understated design: not so many curves and corners like my Obsidian 500D RGB case. This makes it look so much better -Easy to clean: front and top dust filters come off very easily, giving you quick access to fans. Also makes for easy fan and rad install -Lots of room for cables: this area is nice and wide unlike many cases I've had -Lots of flexibility. You can mount fans on the front, or the side, or both. HDD cage can be moved forward to accommodate your PSU cables, or it can be taken out entirely. HDD or SSDs can also be mounted to motherboard tray, which can be entirely removed as well. Can remove motherboard cable shroud. Can remove power supply shroud extender to fit larger rads in front. Just so many options with this case to suit all your needs! -Includes lots of Velcro straps to secure cables: very handy -Minor, but it matters: Back fan mount is pushed further back, so that it does not block your motherboard's RGB. Modern problems require modern solutions! -Cute yellow accents throughout the case. My favorite spot: the USB-A ports -Includes 2 USB-A and 1 USB-C port -Side panels easily come off and out of the way, without feeling like you're going to drop the panels mid-removal

Cons: -Not needed for my build, but I wish the HDD cage slid a couple inches further to help accommodate larger power supplies -Motherboard cable shroud is a bit of a pain to work with, as you have to bend the cables. But it is doable. Can be removed entirely as well -Not applicable for me, but some may prefer the front I/O to have separate microphone and headphone jacks, rather than the combo this has. I personally don't use a mic anyway, and you could just plug it into back I/O anyway

Overall Review: This is a fantastic case. Corsair is really getting their act together and getting serious about good cases. It was a joy to build in, and I'm kind of sad my build was done - it was just so fun! I love the simple look of this case. It looks great. It's also comforting having so much space, so I shouldn't need to change cases for quite some time! Switching to this case also brought my GPU temps down a few degrees, and I'm noticing that it takes longer to heat up, and cools down quickly. Genuinely impressed!

Pros: -Very nice build quality; does not feel like cheap material -Cable management ties included -Holes for cables in very well-thought-out places -Motherboard standoffs preinstalled (in ATX configuration) -A little nub standoff instead of a screw hole to use for positioning your motherboard while you get those tricky first screws in. -Absolute ton of cooling intake capacity -Side panels are super painless to open -Concise, compact, and conveniently placed front I/O -Looks awesome

Cons: My Corsair RM 750W PSU was a *little* long, so it took a *little* bit of wiggling cables around to get them over the hard drive mount thingy and to where they’re supposed to go. Of course I could have taken the thing out but A) I’m lazy and B) I’m planning to get a hard drive in the future once my 500GB PCIe m.2 NCMe SSD (also made by Corsair btw) fills up... see A

Overall Review: This is my first time touching the inside of a computer other than upgrading the RAM and GPU on a mico-ATX pre-build thingy from 2014 so take this with a small grain of salt... But I will DEFINITELY be a costumer or Corsair again! My CPU cooler, SSD, and PSU are all made by Corsair, and are all awesome products. (I do however have a few friends who are relatively well-versed in what is good and what is not so good in terms of computer building so I like to think I’m not flying completely blind). Regardless, something about my experience building with this case and my other Corsair bits and bobs just rubbed me the right way. 10/10 will recommend!!! :D

Pros: -Beautiful case. -There's plenty of room to build in and for cable management. -Solid construction. -Easy to open and close case. - 2 holes in lower corner of PSU shroud to run RGB LED strips through.

Cons: I wish it was a little bigger/taller to where I could fit a 280mm AIO in the ceiling with full size ram. I'll probably just go with 240mm and keep my DIMM slots accessible for whatever I can get a good deal on.

Overall Review: I would recommend this to anybody looking for a great looking midsize ATX case.

Pros: I bought this case for the obvious reason of needing lots of airflow. I didn't wanna have to buy a separate CPU cooler since I was building my brother's PC on a budget, and that's when I found this. Lots of space inside and it looks great against my black desk, especially with RGB lighting.

Cons: Only 2 case fans but that should be expected for the price.

Overall Review: Invest in some extra fans to attach to the front panel if you want to maximize the airflow potential. Aside from that, I would highly recommend this case especially if you're on a budget.

Pros: Great airflow compared to my old case (H510), has tons of space and there is a cover to hide cables.

Cons: Front panel housing is made of plastic and mine came damaged. The plastic clips holding in the panel broke during shipping but it doesnt matter to me because some clips survived. I personally do not care that it came damaged but other people might see this as a big problem so maybe changing the material that protects the case could be a good idea.

Overall Review: Solid case overall but front panel housing could be reinforced to stop the problems I had. Case has tons of room and the dark tempered glass makes any rgb inside really pop and standout.